Notable Industrial Engineers

  • Walter A Shewhart >

    The year 1924—at a factory in Cicero, Illinois—saw the start of two of the most important developments ever in managerial thinking. In May that year Walter Shewhart described the first control chart which launched statistical process control and quality improvement. In November of that year there began a series of research projects which came to be known as the Hawthorne studies. This body of work was central to the creation of the fields of the Read More
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

The maximum pounds, or the maximum load in pounds at a given load center, that a truck can safely transport and/or stack to a specified height.

Published in Facility Planning

The area within a facility or warehouse devoted to the placement of large, greater than loose-issue quantities of items, or in which each single item is too large to be placed in a bin storage location.

Published in Facility Planning

Full and unbroken containers of supplies. Bulk storage can involve piles of raw material (stone), tanks (oil), silos (sand), and similar on-site methods of containing homogeneous commodities.

Published in Facility Planning

A bar code symbol that permits reading in complementary (2) directions.

Published in Facility Planning

The ability to read data successfully whether the scanning motion is left to right or right to left.

Published in Facility Planning

A material flow path over which material flow takes place in two opposite directions.

Published in Facility Planning

A belt conveyor having a conveying surface of two or more spaced strands of narrow conveyor belts.

Published in Facility Planning

Moving, endless, flexible belt, or belts, which may be formed into a tubular shape by joining of edges, and which are opened while in motion to receive load, closed to convey or elevate, and opened to discharge.

Published in Facility Planning

A belt conveyor in which the carrying run of the conveyor belt is supported by flat belt idlers or by a flat surface.

Published in Facility Planning

An area of a plant or facility devoted entirely to loose item or open stock placement.

Published in Facility Planning
Page 1 of 3

Thank you for visiting, feel free to contact admin@ie-tutorials.com for any inquiry or comments. The quality of our service depends on you interaction.